Disc-Style chipper capable of processing brush or limbs up to 6 inches.

This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged

The HD99 is the most powerful single operator earth drill in the Ground Hog line. With it's 9hp Honda engine, the HD99 can easily drill 6", 8" and 10" diameter holes. The use of hydraulics allows the HD99 to have variable auger speed and reverse which is very useful if the auger gets stuck.

Husqvarna, 3-N-1, High Wheel, Push Lawn Mower, 160CC Honda Engine, 21" Stamped Steel Deck, Rear Bag/Side Discharge/Mulch Capable, Mulch Kit Included

21-Ton log splitter

Husqvarna 560BTS is a powerful commercial back pack blower designed for demanding tasks. Large air flow and high air speed are provided by an efficient fan design together with the powerful X-Torq® engine. Commercial grade air filter gives long operating time and trouble free use. The harness has wide shoulder straps. Frame mounted throttle.

Maxim's RMT Series features:
•Maxim's largest serviceable roller chain and sprocket transmission with more power and slower tine speed
•Braced, 12 guage seamless tubular steel handles
•Fourteen and 26" tilling width
•Heavy-duty steel transport wheels with spring loaded latch pin
•3/16" Angle Iron, braced frame
•13" Heavy Duty Slasher Tines with bolt on blades
•Cast Hitch with Spring loaded pins
•Front engine guard
•Choice of Engine: 5.5 hp Honda, 8.25 Gross Torque Briggs and Stratton, 6 hp Robin
•Approximate shipping weight is 150 lbs.

Outback® Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter and other problem vegetation at the rate of 2/3 acre per hour. Powered by a 13 HP Honda engine.

Husqvarna 326LS is a trimmer with straight shaft, E-TECH II and built for tough commercial use.

Well-balanced design allows high productivity. M1 Cutters have 3 cutting surfaces on each tooth - quick & easy change. adjustable handle

The operator friendly controls couldn’t be easier: one handle to set the tine drive and one to adjust the wheel drive. Just engage the clutch lever, use the variable speed drive to adjust the ground speed and engage the tines when you are ready to till. If you need to stop for a moment, just drop the clutch and the tines and wheels will stop, leaving your engine running and ready to pick up where you left off.